![background image](http://html1.mh-extra.com/html/icom/ic-f34gs/ic-f34gs_instruction-manual_612558020.webp)
16
4
BIIS OPERATION
■
Default setting
The following functions are assigned to each programmable
key as the default. However, the assigned function can be
changed by your dealer. Ask your dealer for details.
NOTE:
[TX Code Enter] must be assigned to any key.
[P0]; Call
: Push to transmit a 5-tone/BIIS call
when the selected channel is a 5-
tone or MSK channel, respectively.
[P1]; Digital
: Push to select the call list ID/trans-
mit message, or to display the
receive message record for selec-
tion.
[P3]; TX Code Enter
: Push to enter the direct ID code edit
mode for both 5-tone and MSK.
[UP]/[DOWN]; CH Up/Down
: While in the standby condition,
selects the operating channel.
After pushing [Digital] or [TX Code
CH Select], selects call list or TX
code channel, respectively.
[MONITOR]; Moni(Audi): Push this key after the communica-
tion to send a ‘Clear down’ signal
during MSK channel operation.
[P2]/[RED]; Null
: No function is assigned.
■
Receiving a call
D
D
Individual call
q
When an individual call is received;
• Beeps sound.
• “
” appears and the mute is released.
• The programmed text message (e.g.“
”) and the calling
station ID (or text) is displayed alternately, depending on the set-
ting.
• “
” appears or blinks depending on the setting.
w
Push and hold [PTT], then speak into the microphone at a
normal voice level.
• “
” indicator appears.
e
Release [PTT] to return to receive.
• “
” appears while receiving a signal.
r
To finish the conversation, push [MONITOR] (Moni(Audi))
to send the ‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
” is displayed for 2 sec. (approx.).
• “
” disappears and the transceiver returns to the standby condi-
tion.
Appears or blinks
Appears
IC-F34_44GT_GS-1.qxd 04.9.24 10:26 AM Page 16 (1,1)