background image

i

IMPORTANT

READ ALL INSTRUCTIONS

 carefully and com-

pletely before using the transceiver.

SAVE THIS INSTRUCTION MANUAL —

 This 

instruction manual contains important oper ating instructions 
for the 

IC-F3262DT, IC-F3262DS VHF dPMR HANDHELD 

TRANSCEIVERS

  and 

IC-F4262DT,  IC-F4262DS  UHF 

dPMR HANDHELD TRANSCEIVERS

.

•  This instruction manual includes some functions which 

are usable only when they are preset by your dealer. 
Ask your dealer for details.

•  See the operating guide for details of BIIS (Binary In-

terchange of Information and Signaling) and IDAS™ 
dPMR™ (digital Private Mobile Radio) system opera-
tions. Ask your dealer for details.

WORD

DEFINITION

R

DANGER!

Personal death, serious injury or an explo-
sion may occur.

R

WARNING!

Personal  injury,  fire  hazard  or  electric 
shock may occur.

CAUTION

Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No risk 
of personal injury, fire or electric shock.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany, 
France, Spain, Russia and/or other countries.
IDAS is trademark of Icom Incorporated (Japan).
dPMR and the dPMR logo are trademarks of the dPMR MoU Association.
All other products or brands are registered trademarks or trademarks of their 
respective holders.

EXPLICIT DEFINITIONS

Summary of Contents for IC-F3262DT









































Reviews: