background image

ii

R

 

DANGER!

 

NEVER

 short the terminals of the bat-

tery pack.

R

 

DANGER!

 Use and charge only specified Icom bat-

tery packs with Icom radios or Icom chargers. Only Icom bat-
tery packs are tested and approved for use with Icom radios 
or  charged  with  Icom  chargers.  Using  third-party  or  coun-
terfeit  battery  packs  or  chargers  may  cause  smoke,  fire,  or 
cause the battery to burst.

R

 

WARNING!  NEVER

  hold  the  transceiver  so  that 

the  antenna  is  very  close  to,  or  touching  exposed  parts  of 
the body, especially the face or eyes, while transmitting. The 
transceiver will perform best if the microphone is 5 to 10 cm (2 
to 4 inches) away from the lips and the transceiver is vertical.

R

 

WARNING!  NEVER

 

operate  the  transceiver  with 

a headset or other audio accessories at high volume levels. 
Hearing experts advise against continuous high volume op-
eration. If you experience a ringing in your ears, reduce the 
volume level or discontinue use.

R

 

WARNING! NEVER

 

operate the transceiver while 

driving  a  vehicle.  Safe  driving  requires  your  full  attention—
anything less may result in an accident.

CAUTION:  MAKE  SURE

 

the  flexible  antenna,  bat-

tery pack and jack cover are securely attached to the trans-
ceiver, and that the antenna and battery pack are dry before 
attachment. Exposing the inside of the transceiver to dust or 
water will result in serious damage to the transceiver.

DO NOT

 operate the transceiver near unshielded electri-

cal blast ing caps or in an explosive atmosphere.

DO NOT

 push [PTT] when you do not actually intend to 

transmit.

DO NOT

 

use or place the transceiver in direct sunlight or 

in  areas  with  temperatures  below  –30°C  (–22°F)  or  above 
+60°C (+140°F).
The basic operations, transmission and reception of the trans-
ceiver are guaranteed within the specified operating tempera-
ture  range.  However,  the  LCD  display  may  not  be  operate 
correctly, or show an indication in the case of long hours of 
operation, or after being placed in extremely cold areas.

DO  NOT

  modify  the  transceiver. The  specifications  may 

change and then not comply with the requirements of a corre-
sponded regulation. The transceiver warranty does not cover 
any problems caused by unauthorized modification.

DO NOT

 use harsh solvents such as benzine or alcohol 

when cleaning, as they will damage the transceiver surfaces.

PRECAUTIONS

Summary of Contents for IC-F3230D










Reviews: