Icom IC-F320, Instruction Manual, Page: 16 / 24

OPTIONAL SmarTrunk II™ OPERATION
4
13
■
SmarTrunk II™ and
conventional modes
This transceiver is capable of SmarTrunk II™ functions.
The optional UT-105 allows communication in conventional
channels or SmarTrunk II™ channels. Select a channel bank
for SmarTrunk II™ before trunking operation.
• Push [
BANK
] one or more times to select a channel bank for
conventional channels or SmarTrunk II™ channels.
• Scanning starts when a channel bank for SmarTrunk II™ is se-
lected.
• Contact your Dealer for channel bank details.
NOTE: Connect an optional HM-100T
DTMF MICRO-
PHONE
. Contact your Dealer for details.
■
SmarTrunk II™ operation
These features are enabled by a Dealer or System Operator
and may not be available in your system. Contact your Dealer
for details.
D
Placing a telephone call
Enter the phone number followed by [1], [
M
].
• A high-pitched beep indicates that the number is accepted.
• When the called party answers, push the [PTT] switch to talk, and
release it to listen.
D
Calling another local system subscriber
Enter the subscriber number followed by [3], [
M
].
• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber an-
swers.
• If the other subscriber is on another call or out of range, you hear a
fast busy signal and the call terminates automatically.
D
Receiving a call
When you hear ringing, push [
M
] to answer.
• For a group call, you hear a short ring followed by two short beeps.
You do not have to answer a group call to hear it over the air.
IC-F310(new) 02.3.23 1:34 PM ページ13