23
8
OPTIONAL UNIT INSTALLATION
You can install two of the following optional units in the transceiver.
UT-105
SmarTrunk II
TM
Logic Board
, UT-109/UT-110
VOICE SCRAMBLER
UNIT
,
UT-111
TRUNKING BOARD
,
UT-113
MAN DOWN UNIT
.
‘
‘
Installation
q
Unscrew nut
a
, and remove the knobs.
w
Unscrew screw
b
, 2 screws
c
then remove multi-connector
cover and rear panel.
e
Unscrew 2 screws
d
, then remove multi-connector.
r
Unscrew 2 screws
e
then separate the chassis from the front
panel in the direction of the arrow.
Be careful!
: A flat cable is connected between the MAIN unit on the
chassis and front panel.
t
Install the desired optional unit. Insert tightly to avoid bad con-
tact.
NOTE:
When installing
UT-105 or UT-111, the unit
MUST BE
plugged into
SLOT 1
. Otherwise the
unit will not work correctly.
(Other optional units can be
plugged into either slot.)
y
Program the necessary information with the cloning software be-
fore operation. Please ask your dealer or system operator for de-
tails.
a
b
d
d
c
e
Slot 1
Slot 2
IC-F30G series-5.qxd 05.2.21 14:35 Page 23 (1,1)
