1-1
SECTION 1. SPECIFICATIONS
M
GENERAL
• Frequency range:
446.00625–446.09375 MHz
• Number of conventional channels:
16
• Type of emission (Occupied band-width):
8K50F3E (12.5 kHz)
• Operating temperature range:
–25˚C to +55˚C
• Power supply voltage:
Specified Icom's battery packs only (7.5 V DC: negative ground)
• Current drain (Approximately):
Receiving
80 mA (stand-by)
300 mA (maximum audio, internal speaker)
Transmitting
0.5 A (at 0.5 W ERP)
• Dimensions (Projections not included):
With BP-279
52.2(W) × 186.1(H) × 24.5(D) mm
• Weight:
With BP-279
240 g
• Intermediate frequency:
1st
2nd
46.35 MHz
450 kHz
• Input impedance (Microphone):
2.2 k
• Output impedance (Speaker):
8
M
TRANSMITTER
• Output power:
0.5 W ERP
• Modulation:
Variable reactance frequency modulation
• Maximum frequency deviation:
±2.5 kHz
• Frequency stability:
±2.5 ppm
• Spurious emissions:
0.25 µW (
1 GHz), 1.00 µW (
1 GHz)
• Adjacent channel power:
60 dB
• Audio harmonic distortion:
1.0% typical at AF 1 kHz 60% deviation
• Residual modulation (With CCITT FILTER):
48 dB typical
• Limiting charact of modulator:
60–100% of maximum deviation
M
RECEIVER
• Sensitivity:
26.5 dBµ V/m at 20 dB SINAD
• Intermodulation:
86.29 dBµ V/m
• Spurious response:
91.29 dBµ V/m
• Audio output power:
0.8 W typical at 5% distortion into the 12
internal speaker.
0.4 W typical at 5% distortion into an 8
external speaker.
• Adjacent channel selectivity:
81.29 dBµ V/m
• FM Hum and noise (With CCITT FILTER):
47 dB typical
• Squelch sensitivity (Threshold):
26.5 dBµ V/m
Specifications are measured in accordance with EN 300 296.
All stated specifications are subject to change without notice or obligation.
