Icom IC-F1610, Instruction Manual

Page: 18 / 22

14
4
OPTIONAL SmarTrunk II™ OPERATION
■
SmarTrunk II™ and
conventional modes
This transceiver has SmarTrunk II™ compatible capabilities.
The optional UT-105 allows communication in conventional
channels or SmarTrunk II™ channels. Select a channel bank
for SmarTrunk II™ before trunking operation.
Push [ BK UP ] or [ BK DN ] one or more times to select a chan-
nel bank for conventional channels or SmarTrunk II™ chan-
nels.
• Pushing [ CH UP ] or [ CH DN ] while pushing [ BK S ] can also select
the channel bank.
• Scanning starts when a channel bank for SmarTrunk II™ is se-
lected.
• Contact your dealer for channel bank details.
☞
NOTE: Depending on how your transceiver has been set
up, the keypad or an optional DTMF microphone can be
used to input SmarTrunk II™ commands. Contact your
dealer for details.
■
SmarTrunk II™ operation
These features are enabled by a dealer or system operator
and may not be available in your system. Contact your dealer
for details.
D
Placing a telephone call
Enter the phone number followed by [1], [
M
].
• A high-pitched beep indicates that the number is accepted.
• When the called party answers, push the [PTT] switch to talk, and
release it to listen.
D
Calling another local system subsriber
Enter the subscriber number followed by [3], [
M
].
• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber an-
swers.
• If the other subscriber is on another call or out of range, you hear a
fast busy signal and the call terminates automatically.
D
Receiving a call
When you hear ringing, push [
M
] to answer.
• For a group call, you hear a short ring followed by two short beeps.
You do not have to answer a group call to hear it over the air.
IC-F1610_F2610.qxd 03.3.7 16:29 Page 14 (1,1)