![background image](http://html1.mh-extra.com/html/icom/ic-f14/ic-f14_instruction-manual_4219121024.webp)
18
4
OPTIONAL UNIT INSTALLATION
■
Optional unit installation
Install the optional unit as follows:
q
Rotate
[VOL]
to turn the power OFF, and remove the battery
pack. (p. 3)
w
Remove the unit cover.
NOTE:
Use a flat head screw driver or a similar flat instru-
ment, and insert into the hollow of the chassis, then lift and
take away the unit cover. (The removed cover cannot be
used again.)
e
Install the unit as shown below.
*This illustration is
described
with
the UT-110.
r
Replace the unit cover and the battery pack, then rotate
[VOL]
to turn the power ON.
NOTE:
The optional UT-109/UT-110
scrambler
units
requires
some PC board modifications. Please refer to the additional in-
stallation as at right.