background image

1

PANEL DESCRIPTION

1-5

DTMF AUTODIAL

Push to transmit the preset DTMF code.

CALL

Push to transmit a 2-Tone or 5-Tone in the operating 

channel.

CALL A (CODE 1)/CALL B (CODE 2)

 

(only for the analog mode operation)

 

// only for the LMR model //

While in analog mode operation, push to transmit a 

2-Tone code as station code, that is set in the channel 

1 (Code A) or channel 2 (Code B).

CALL A (CODE 30)/CALL B (CODE 29)

 

(only for the analog mode operation)

 

// only for the PMR model //

While in analog mode operation, push to transmit a 

5-Tone code as the station code, that is set in the 

channel 30 (Code A) or channel 29 (Code B).

EMERGENCY

 Hold down for the set time period* to turn ON the 

 

Â

Emergency function.

  •  The countdown for the Emergency call transmission 

starts. After the countdown, an Emergency call is 

automatically transmitted once, or repeatedly*.

 During the first countdown, hold down for the set 

 

Â

time period* to cancel the Emergency function.

*Depending on the presetting. Ask your dealer for details.

SURVEILLANCE

 Hold down for 1 second to turn ON the Surveillance 

 

Â

function.

Push to turn OFF the Surveillance function.

 

Â

When this function is turned ON, the beep is not 

heard and the LED indicator does not light, even when 

a signal is received, or a key is pushed.

SIREN

Hold down for 1 second to emit a siren sound.

 

Â

  •  This function can be used for situations other than an 

Emergency alert, such as a security alarm.

 Turn OFF the transceiver power to stop the siren 

 

Â

sound.

ENCRYPTION

 

(only for the digital mode operation)

 Hold down for 1 second to turn ON the Encryption 

 

Â

function.

Push to turn OFF the Encryption function.

 

Â

ANNOUNCE

Push to turn the Channel Announce function ON or 

OFF.

When this function is turned ON, the transceiver 

announces the position of [ROTARY SELECTOR].

CALL ALERT

 

(only for the digital mode operation)

Hold down for 1 second to transmit a Call Alert.

STATUS

 

(only for the digital mode operation)

Hold down for 1 second to transmit a Status call.

Summary of Contents for ic-f1000d series
































Reviews: