13
4
MEMORY OPERATION
■
Programming a memory
channel
The transceiver has 200 (20 CH
×
10 BANK) memory chan-
nels for storage of often-used frequencies.
q
Push [CLR•
DEL
] to select the frequency mode, if neces-
sary.
w
Select the desired frequency.
• Set the desired frequency using [DIAL] or keypad.
e
Push
,
then push [MR•
MW
] to enter the memory pro-
gramming mode.
• “M”, memory BANK and memory channel number are blink.
r
Rotate [DIAL] to select the desired memory channel
number.
• Push
, then push [0•
BANK
], and rotate [DIAL] to select the
BANK number if desired.
• Push [CLR•
DEL
], [ENT] or push
then push [0•
BANK
] to exit
the BANK selection mode.
t
Push [ENT] to program the information into the channel
and return to the frequency mode.
(or rotate [DIAL])
(or rotate [DIAL])
Push
Push
Push
Push
or
Push
Push
Push
or
• EXAMPLE:
Programming 118.250 MHz into memory
BANK 3/ memory channel 9.
4