Icom IC-A220T, Instruction Manual

Page: 31 / 40

24
5
MENU MODE
0 5
D
Time-Out-Timer “TIME OUT”
To prevent accidental prolonged transmission, the
transceiver has a time-out-timer. The function inhibits
continuous transmissions longer than the set period of time.
• 005 to 035: Sets the time-out-timer period to between 5 seconds
and 35 seconds in 1 second step.
D
Interlock “INTERLOCK”
If the transceiver is connected together with the other
transceiver, the interlock function can prevent the
transceiver from receiving or transmitting while the other
transceiver is transmitting.
• ON: The interlock function is ON.
• OFF: The interlock function is OFF.
D
Interlock mode “INTLOCK MODE”
Sets the function to be disabled by the interlock.
• TX INHIBIT: Transmission is disabled.
• RX MUTE: Audio output is disabled.
• BOTH: Both transmission and audio output are disabled.
D
Remote exchange “REM SWAP”
Sets the remote control (p. 15) to use the frequency
exchange key or not.
• OFF: The remote control for the frequency exchange key is
OFF.
• ON: The remote control for the frequency exchange key is
ON.
D
Remote incom “REM INCOM”
Sets the remote control (p. 15) to use the intercom or not.
• OFF: The remote control for the intercom is OFF.
• ON: The remote control for the intercom is ON.
D
Remote recall “REM RECALL”
Sets the remote control (p. 15) to use the recall key or not.
• OFF: The remote control for the recall key is OFF.
• ON: The remote control for the recall key is ON.
D
Memory clear “MEM CLEAR”
Selects an item to be reset.
After the selection, hold down [MEM] for two seconds to
reset the selected item’s contents.
• MENU: Reset the menu mode items setting to their defaults.
• MEMORY: Clear the stored memories except the weather
memory channel.
• ALL: Reset the menu mode items setting to their defaults
and clear the stored memories.