4
2
PANEL DESCRIPTION
Front, top, and side panels
1
2
Microphone
3
4
5
6
7
8
9
Keypad
1
ANTENNA CONNECTOR
Connect the supplied antenna. (p. 1)
2
PTT SWITCH [PTT]
Hold down to transmit, release to receive. (p. 7)
3
SQUELCH ADJUSTMENT KEYS
[SQL
∫
]/[SQL
√
]
Push to adjust the squelch level.
4
UP/DOWN KEYS [
∫
]/[
√
]
z
Push to change or select the frequency, Memory
channel, Set mode settings, and so on.
z
While scanning, push to change the scanning
direction.
5
CLEAR/HOME KEY [CLR]/[HOME]
z
Push to return to the VFO mode.
z
Hold down for 2 seconds to reset the Set mode
settings to default.
6
MEMORY/MEMORY WRITE KEY [MR]/[MW]
z
Push to enter the Memory Channel Selection
z
Push [FUNC], and then push this key to enter the
Memory Write mode. (p. 9)
7
HEADSET JACK
Connects a third party headset through the optional
headset adapter. (p. 13)
8
LOCK KEY [ ]
z
Push to lock the keypad.
z
Hold down for 2 seconds to unlock the keypad.
9
VOLUME/POWER SWITCH [VOL]
z
Rotate to turn the transceiver ON or OFF.
z
Rotate to adjust the audio output level.
Keypad
z
Push to set the frequency, select a Memory
channel, and so on.
z
Push [FUNC], and then push or hold down another
key within 3 seconds to use the secondary functions
listed below.
KEYS
FUNCTIONS
Push [1]/[ANL]
Turn the Automatic Noise
Limiter (ANL) function ON or
OFF.
Push [2]/[SCAN]
Start a scan.
L
Push [CLR] to stop a scan.
Push [3]/[GRP]
In the Memory mode, enter
the Memory Selection mode.
Push [4]/[WX-ALT]* Turn the Weather Alert
function ON or OFF.
Push [5]/[DUP-W]* Enter the Duplex Frequency
Entry mode.
L
Confirm the NAV band
frequency is selected.
Push [6]/[DUP]*
Turn the Duplex function ON
or OFF.
L
Confirm the NAV band
frequency is selected.
Push [7]/[WX]*
Enter the Weather Channel
Selection mode.
Push [8]/[BEEP]
Turn the Key beep ON or OFF.
Push [9]/[TAG]
Tag or untag the selected
Memory channel or Weather
Channel*.
Hold down
[ENT]/[SET] for 1
second
Enter the Set mode.
Push [0]/[121.5]
Select the emergency
frequency.
*For only the USA version.