n
Programming a memory channel
Program often-used frequencies with the following instruc-
tions.
D
For IC-A14
q
Push
[CLR] to select the frequency mode, if necessary.
w
Set the desired frequency. (p. 8)
• Push
[FUNC], then push [WX](7) to select a weather chan-
nel mode, and then select the desired weather channel using
[
Y
]/[
Z
] or keypad if desired. (p. 23)
e
Push
[FUNC] then push [MW](MR) to enter the select
memory write mode.
• Memory mode indicator blinks.
r
Push
[
Y
]/[
Z
] to select the desired memory channel
number.
• Push
[FUNC], then push [BANK](3) to enter bank selection
mode, and push
[
Y
]/[
Z
] or appropriate digit key ([0]–[9]), then
push
[ENT] to select the BANK number if desired.
t
Push
[ENT] to program the set condition into the memory
channel and return to the frequency mode.
13
4
MEMORY OPERATION
• EXAMPLE: Programming WX-05 into memory channel 9
in memory BANK 3.
Blinks when select memory
write mode is selected.
No frequency is displayed when a blank channel is
selected.
Push
Push then
Push then
Push then
Push or ,
or, push
Push or ,
or, push
Push then
*Shows briefly.
Push to complete the programmig.
*Shows briefly.