Icom IC-9700 Advanced Manual Download

Page: 146 / 173

11-7

11. ABOUT THE DV GATEWAY FUNCTION

When connecting your device to the Internet using a mobile router

Setting up a network

The following items are needed to use the DV

Gateway function.

• An Internet connection with an IPv4 Global IP address

• A static*

local IP address set to your Windows or

Android device

• Port forwarding of port 40000

1. A Global IP address

A static or dynamic IPv4 Global IP address assigned to the mobile router is needed.

Your router may not have a Global IP address, depending on your Internet service provider.

Ask your Internet service provider about the Global IP address setting.

2. Setting a static local IP address

When using a mobile router, you need to set a static local IP address to Windows or Android device.

Usable IP addresses differ, depending on your router. Ask the router’s manufacturer for details.

Do not set the same IP address to two or more devices that are connected to the same router.

Ask your Windows or Android device’s manufacturer about the setting details.

3. Port forwarding

When using a mobile router, enable communication with the Internet, as described below.

• Forward the port number 40000 to your Windows or Android device.

• “UDP” should be used as the port protocol.

• Set a static local IP address in Procedure 2 (2. Setting a static local IP address to your device) as a destination

port.

Ask the router’s manufacturer about how to forward the port.

Only one Windows or Android device connected to the router can use the DV Gateway function at the same time.

Depending on the router settings, you may need to configure the IP filter settings. Check the router’s manual on how to

configure the settings.



When using a Windows device, go to “Setting up the RS-MS3W.” (p. 11-10)



When using an Android device, go to “Setting up the RS-MS3A.” (p. 11-11)

Internet

OPC-

2350LU

OPC-

2350LU

A static IP address to the transceiver, Windows, or Android

device is recommended.

Forward port number 40000.

Needs a Global IP address.

Needs a Global

IP address.

Summary of Contents for IC-9700














































































































































































Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands

Icom IC-9700, Advanced Manual

Search results

Summary of Contents for IC-9700

Reviews:

Related manuals for IC-9700

Brands by name

Popular brands