![background image](http://html.mh-extra.com/html/icom/ic-78/ic-78_service-manualvice-man_612336020.webp)
5 - 6
TRANSMITTER ADJUSTMENTS—continued
CARRIER
SUPPRESSION
AM
CARRIER
AM
MODULATION
CW
CARRIER
ADJUSTMENT
ADJUSTMENT
ADJUSTMENT CONDITION
MEASUREMENT
VALUE
POINT
UNIT
LOCATION
UNIT
ADJUST
1
1
1
2
1
• Display frequency: 12.23000 MHz
• Mode
: USB
• Mic gain
: Minimum (0)
• Apply no audio signals to [MIC]
connector.
• Transmitting
• Display frequency: 12.23000 MHz
• Mode
: AM
• RF power
: Maximum (H)
• Mic gain
: Minimum (0)
• R2321 (MAIN unit): Center
• R2385 (MAIN unit): Center
• Apply no audio signals to [MIC]
connector.
• Transmitting
• Display frequency: 12.23000 MHz
• Mode
: AM
• RF power
: Maximum (H)
• Mic gain
: Center (50)
• R2385 (MAIN unit): 9 o’clock
• Connect an audio generator to
[MIC] connector and set as:
Frequency
: 1 kHz
Level
: 30 mVrms
• Transmitting
• Set an AG as:
Frequency
: 1 kHz
Level
: 3 mVrms
• Transmitting
• Display frequency: 12.23000 MHz
• Mode
: CW
• RF power
: Maximum (H)
• Connect a keyer to the [KEY] jack.
• Key down (transmitting)
Rear
panel
Rear
panel
Rear
panel
MAIN
Connect a spectrum
analyzer to the [ANT]
connector through an
attenuator.
Connect an RF
power meter to [ANT]
connector.
Connect a modula-
tion analyzer to the
[ANT] connector
through an attenua-
tor.
Connect an oscillo-
scope to CP3701 and
[ANT] connector.
Minimum carrier level
40 W
70% modulation
90% modulation
Adjust as follows:
MAIN
MAIN
MAIN
MAIN
R2303
R1730
R2321
R2385
R3703
10 msec.
Keying (CP3701)