![background image](http://html.mh-extra.com/html/icom/ic-78/ic-78_instruction-manual_612334036.webp)
6
EXTRA FEATURES
34
■
INTRODUCTION
Extra features, explained in this section, are available only on some versions of the IC-78. Therefore, the
instructions in this section are not necessary for some versions.
To enter VFO mode, push [FC] for 1 sec.
• VFO indicator appears.
• In the VFO mode, channel comment cannot be indi-
cated.
[FC]
■
VFO operation
D
Entering VFO mode
D
Tuning
The transceiver has several ways of tuning for tem-
poral operation as follows;
• Tuning with the channel selector
By rotating the channel selector, operating fre-
quency changes in the desired tuning step, set in
the
quick set mode. (p. 30)
This is the most convenient way when searching
for signals around the pre-programmed frequency.
• Tuning with the keypad
Enter the frequency as follows.
➥
For duplex operation setting, push [TXF] then set
the transmit frequency, after the receive frequency
is set.
Appears only when 1 Hz
tuning step is selected.
Changing digit; according to selected tuning step
•To set to 25.118 MHz
•To set to 706 KHz (0.706 MHz)
•To set to 5.0000 MHz
•To change 13.1430 MHz to 13.3190 MHz
•Start