![background image](http://html.mh-extra.com/html/icom/ic-7610/ic-7610_service-manual_612316016.webp)
4-5
4-4 TRANSMIT ADJUSTMENTS
• Touch [TX/ID] on the main menu screen.
ADJUSTMENT
ADJUSTMENT ITEM DISPLAY
SETTING CONDITION
OPERATION
PREPARATION
1 –
• Connect the RF power meter to the
[ANT1] connector.
Touch [ID] to start the
transmitter adjustment.
ID
ADJUSTMENTS
2 VDL IDL SET
• Receiving
Touch [SET].
(Two beeps sound 0.5
seconds later.)
3 FINAL ID SET
4 FINAL1 IDV
• Automatically transmitted.
5 FINAL2 IDV
6 DRIVER ID SET
• Receiving
7
DRIVER1 IDV
• Automatically transmitted.
8 DRIVER2 IDV
9
PRE DRIVER ID SET
• Receiving.
10 PRE DRIVER1 IDV
• Automatically transmitted.
TX POWER
ADJUSTMENT
PREPARATION
11 TX POWER SET
• Connect the audio generator to the
[MIC] connector and set it to:
Frequency: 1.5 kHz
Level:
10 mV rms
• Receiving.
Touch [SET].
SWR DETECT
NULL POINT
12 SWR detector adjustment
• Automatically transmitted.
Touch [SET].
(Two beeps sound 0.5
seconds later.)
TRANSMIT
OUTPUT
POWER (HF)
13 TX Total HF Gain
• Automatically transmitted.
Set to 50 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
14 POWER HF 1%
Set to 1 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
15 POWER HF 10%
Set to 10 W by [DIAL], then
touch [SET].
16 POWER HF TUNE
(Two beeps sound 0.5
seconds later.)
17
POWER HF 50%
Set to 50 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
18 POWER HF 100%
Set to 103 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
AM CARRIER
POWER RATE
19
POWER AM Ratio HF
• Receiving.
Touch [SET].
20
• Automatically transmitted.
Set to 25 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
TRANSMIT
OUTPUT
POWER
(50 MHz band)
21 POWER 50M SET
• Receiving.
Touch [SET].
22 TX Total 50M Gain
• Automatically transmitted.
Set to 50 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
23 POWER 50M 1%
Set to 1 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
24 POWER 50M 10%
Set to 10 W by [DIAL], then
touch [SET].
25 POWER 50M TUNE
(Two beeps sound 0.5
seconds later.)
26 POWER 50M 50%
Set to 50 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)
27
POWER 50M 100%
Set to 103 W by [DIAL], then
touch [SET].
(Two beeps sound 0.5
seconds later.)