![background image](http://html.mh-extra.com/html/icom/ic-756pro2/ic-756pro2_instruction-manual_612294082.webp)
80
13
CONTROL COMMAND
• Command table (continued)
Command
Sub command
Description
0E
A1–A7
Set
∂
F scan span (A1=±5 kHz,
A2=±10 kHz, A3=±20 kHz,
A4=±50 kHz, A5=±100 kHz,
A6=±500 kHz, A7=±1 MHz)
B0
Set as non-select channel
B1
Set as select channel
D0
Set scan resume OFF
D3
Set scan resume ON
0F
00
Turn the split function OFF
01
Turn the split function ON
10
00
Select 10 Hz (1 Hz) tuning step
01
Select 100 Hz tuning step
02
Select 1 kHz tuning step
03
Select 5 kHz tuning step
04
Select 9 kHz tuning step
05
Select 10 kHz tuning step
06
Select 12.5 kHz tuning step
07
Select 20 kHz tuning step
08
Select 25 kHz tuning step
11
00
Attenuator OFF
06
Attenuator ON (6 dB)
12
Attenuator ON (12 dB)
18
Attenuator ON (18 dB)
12
00
Select/read antenna selection
01
(00=ANT1, 01=ANT2 : Add 0 or 1
to turn [RX ANT] OFF or ON, re-
spectively.)
13
00
Announce with voice synthesizer
01
(00=all data; 01=frequency and
02
S-meter level; 02=receive mode)
14
01 + Level data
[AF] level setting (0=max. CCW to
255=max. CW)
02 + Level data
[RF] level setting (0=max. CCW to
255=11 o’clock)
03 + Level data
[SQL] level setting (0=11 o’clock to
255=max. CW)
06 + Level data
[NR] level setting (0=min. to
255=max.)
07 + Level data
Inside [TWIN PBT] setting or IF
shift setting (0=max. CCW,
128=center, 255=max. CW)
08 + Level data
Outside [TWIN PBT] setting
(0=max. CCW, 128=center,
255=max. CW)
09 + Level data
[CW PITCH] setting (0=low pitch to
255=high pitch)
0A + Level data
[RF POWER] setting (0=mini. to
255=max.)
0B + Level data
[MIC GAIN] setting (0=mini. to
255=max.)
0C + Level data [KEY SPEED] setting (0=slow to
255=fast)
0D + Level data [NOTCH] setting (0=low freq. to
255=high freq.)
0E + Level data
[COMP] setting (0=mini. to
255=max.)
0F + Level data
[BK-IN DELAY] setting (0=short
delay to 255=long delay)
10 + Level data
[BAL] level setting (0=max. CCW,
128=center, 255=max. CW)
15
01
Read squelch condition
02
Read S-meter level
Command
Sub command
Description
16
02
Preamp (0=OFF; 1=preamp 1;
2=preamp 2)
12
AGC selection (1=Fast; 2=Mid;
3=Slow)
22
Noise blanker (0=OFF; 1=ON)
40
Noise reduction (0=OFF; 1=ON)
41
Auto notch (0=OFF; 1=ON)
42
Repeater tone (0=OFF; 1=ON)
43
Tone squelch (0=OFF; 1=ON)
44
Speech compressor (0=OFF; 1=ON)
45
Monitor (0=OFF; 1=ON)
46
VOX function (0=OFF; 1=ON)
47
Break-in (0=OFF; 1=semi break-
in; 2=full break-in)
48
Manual notch (0=OFF; 1=ON)
49
RTTY filter (0=OFF; 1=ON)
19
00
Read the transceiver ID
1A
00
Send/read memory contents (see
p. 82 for details)
01
Send/read band stacking register
contents (see p. 82 for details)
02
Send/read memory keyer con-
tents (see p. 82 for details)
03
Send/read the selected filter width
(0=50 Hz to 40/31=3600/2700 Hz)
04
Send/read the selected AGC time
constant (0=OFF, 1=0.1/0.3 sec. to
13=6.0/8.0 sec.)
0501
Send/read
SSB TX Tone (Bass)
level (0 =min. to 10=max.)
0502
Send/read
SSB TX Tone (Treble)
level (0=min. to 10=max.)
0503
Send/read
MONITOR gain (0=min.
to 255=max.)
0504
Send/read
CW side tone gain
(0=min. to 255=max.)
0505
Send/read
CW side tone gain limit
(0=OFF, 1=ON)
0506
Send/read
beep gain (0=min. to
255=max.)
0507
Send/read
beep gain limit (0=OFF,
1=ON)
0508
Send/read
LCD contrast (0=0% to
255=100%)
0509
Send/read
LCD backlight (0=0% to
255=100%)
0510
Send/read
LCD horizontal position
(0=1 to 7=8)
0511
Send/read
switch backlight (0=1 to
7=8)
0512
Send/read
display type (0=A, 1=B,
2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
0513
Send/read
display font (0=Basic1,
1=Basic2, 2=Pop, 3=7seg,
4=Italic1, 5=italic2, 6=Classic)
0514
Send/read
memory name (0=OFF,
1=ON)
0515
Send/read my call setting (
10-char-
acter: see p. 82)
0516
Send/read
current time (0000 to
2359)
0517
Send/read
power-ON timer set
(0000 to 2359)