background image

IC-746 FAQ 

Plenty of sales and technical information is available (including downloadable pictures and 
brochures) from Icom's WWW site at: 
 

http://www.icomamerica.com/

 

There is a Yahoo discussion group devoted to the IC-7400, as well as a group devoted to the 
746 series in general. 
 

http://groups.yahoo.com/group/IC7400

 

 

http://groups.yahoo.com/group/IC746/files/IC-746pro-Instruction-Manual-2.pdf

 

Icom has not yet made a copy of the IC-746-PRO instruction manual available in electronic 
form, however, the FCC has.  You can access it and other information at: 
 

http://gullfoss2.fcc.gov/cgi-

bin/ws.exe/prod/oet/forms/reports/Search_Form.hts?mode=Edit&form=Exhibits&application
_id=740578&fcc_id=AFJIC-746PRO

 

And a nice ham-written synopsis appears at: 
 

http://www.qsl.net/ab4oj/ja7ude/ic7400.html

 

 

http://www.qsl.net/ab4oj/icom/ic7400/ic7400.html

 

2.14  

Where can I find info on other Icom rigs? 

2.15  

Where is info on the 706, 718, 756, 765, 735, ... 

This FAQ is devoted to the IC-746.  As of November 2001, we do not know of any FAQ's 
devoted to other Icom models.  However, as of Jan-2002, a project was underway to start 
accumulating and centralizing Icom information at: 
 

http://www.qsl.net/icom/

 

While the coordinators of this list already have their hands full, they would be glad to advise, 
help, and collaborate with people interested in maintaining other FAQs. 
Much of the generic information in this FAQ is applicable to other Icom rigs, but please, use 
common sense when trying to apply it. 
For general information on other Icom rigs try: 
Icom's WWW site at: 
 

http://www.icomamerica.com/

 

Icom e-mail discussion group at: 
 

http://www.qth.net/

 

Usenet newsgroup: 
 

news:rec.radio.amateur.equipment

 

The Icom Amateur Radio Information Pages at: 
 

http://www.qsl.net/icom/

 

Page 18  of  113 

2003-02-08 

Summary of Contents for IC-746


















































































































Reviews: