9
MEMORY OPERATION
9-6
Memo Pad
Save the displayed content by touching
MPAD
for 1
second.
L
When you save the 6th Memo Pad, the oldest
Memo Pad is automatically cleared to make room
for the new Memo Pad.
NOTE:
Each Memo Pad must have its own unique contents.
The Memo Pads with identical content cannot be
saved.
There are 5 Memo Pads as the default to save
frequencies and operating modes for easy write and
recall. You can increase the Memo Pads to 10 in
“Memopad Numbers” (p. 12-6).
MENU
» SET > Function >
Memo Pad Quantity
L
The Memo Pads are separate from memory
channels.
D
Saving the displayed contents into a
Memo Pad
Operating frequency
of the VFO mode or
Memory mode
Newest Pad
Oldest Pad
Cleared
Memo Pad
Memo Pads are convenient when you want to
temporarily memorize a frequency and operating
mode, such as when you find a DX station in a pile-up,
or when the desired station is busy for a long time and
you want to temporarily search for other stations.
You can use the Memo Pads in both the VFO and
Memory modes.
Use Memo Pads instead of relying on hastily scribbled
notes that are easily misplaced.
MPAD
D
Calling up the Memo Pads
You can call up the saved Memo Pads.
Push
MPAD
several times until the desired Pad is
displayed.
L
The calling up starts with the most recently saved
contents.
TIP:
When you call up a Memo Pad, the contents
that were previously displayed is automatically saved
in a temporary pad. You can recall the temporary pad
by pushing
MPAD
several times until the desired Pad
is displayed.
• You may think there are 6 Memo Pads because 6
different frequencies are called up. However, 5 are in
Memo Pads and 1 is in a temporary pad).
D
Using the Memo Pad list
1. Open the MEMO PAD list screen.
MENU
»
MPAD
2.
Touch [▲] or [▼] to select the desired Memo Pad.
L
Touch [DEL] for 1 second to delete the selected
Memo Pad.
L
Touch [DEL ALL] for 1 second to delete all the
Memo Pads.
3. Touch
EXIT
to close the MEMO PAD list screen.
TIP:
If you change the frequency or operating
mode called up from Memo Pads, the contents are
automatically updated in a temporary Pad.
Temporary Pad
Previous view
