3
BASIC OPERATION
3-10
Setting frequency (Continued)
1/4 tuning step function
D
(Mode: SSB-D/CW/RTTY)
The dial speed is reduced to
1
⁄
4
of the normal speed
when the
1
⁄
4
tuning function is ON, for finer tuning con-
trol.
You can set the
1
⁄
4
tuning function in each operating
frequency band.
This function is selectable only when the quick tuning
function is turned OFF.
Push
q
MENU
(
C
) one or more times to select the
“M-2” screen (M-2 menu).
Touch [1/4](
w
D
) to turn the
1
⁄
4
tuning function ON or
OFF.
• “
” appears when the 1⁄4 tuning function is ON.
Auto tuning step function
D
When you rapidly rotate the Dial, the tuning speed can
automatically accelerate, depending on the “MAIN DIAL
Auto TS” option in the “Function” Set mode.
Push
q
SET
(
C
) to enter the Set mode.
Touch the “MAIN DIAL Auto TS” item of the “Func-
w
tion” Set mode.
Function >
MAIN DIAL Auto TS
• If the specified item is not displayed, touch [
Y
] or [
Z
](
D
)
one or more times to select the page.
Touch the desired option to select
e
the HIGH or LOW
tuning speed acceleration, or to turn OFF the func-
tion.
• HIGH: When the tuning step is set to 1 kHz or small
-
er steps, the tuning speed is approximately five
times faster.
When the tuning step is set to 5 kHz or larger
steps, the tuning speed is approximately two times
faster.
(default)
• LOW: Approximately two times faster
• OFF: Auto tuning step is turned OFF.
• If desired, touch the item for 1 second to open the Default
set window, then select the “Default” to reset to the de-
fault setting.
Push
r
SET
(
C
) to exit the Set mode.
The
L
,
R
,
C
or
D
in the instructions indicate the
part of the controller.
L
: Left side,
R
: Right side,
C
: Center bottom
D
: Display (Touch screen)
Touch [1/4]
¹⁄
₄
tuning icon
Touch
“Function”
Touch “MAIN
DIAL Auto TS”
Push
SET
HIGH (Default)