12
SCAN OPERATION
12-17
The receive frequency and the operating mode setting
[BANK]/
[M-CH]
DR
When the VFO
frequency is set
as the priority
channel
Select the repeater to receive
(Example: Hirano43)
Select the DR
mode
Touch
“PRIO Watch ON”
Appears while
the priority
scanning
Set the
receive
frequency
in the VFO
mode.
Checks the selected priority channel every 5 seconds,
while receiving a repeater in the DR mode.
Set the priority channel
1.
•
Using the VFO frequency
q
Touch the Memory channel number indication
once or twice to select the VFO mode. (p. 3-4)
w
Set the receive frequency and the operating
mode. (p. 3-7, 3-17)
•
Using the Memory/Call/Program Scan Edge
channel
q
Touch the Memory channel number indica-
tion once or twice to select the Memory mode.
(p. 3-4)
w
Rotate [BANK] or [M-CH] (
L
) to set the priority
channel.
•
Memory channel, Call channel or Program Scan Edge
channel can be selected as the priority channel.
Select the repeater in the DR mode
2.
q
Push
DR
(
C
) to select the DR mode. (p. 3-17)
w
Touch “FROM” (Access repeater), if “FROM” is
not selected.
e
Rotate the Dial to select the desired repeater.
•
You can select a repeater in the “FROM SELECT” screen
that is displayed after touching the repeater name on
“FROM.”
Start the Priority scan
3.
q
Push
QUICK
(
D
) to open the Quick Menu win-
dow.
w
Touch “PRIO Watch ON” to start the Priority
scan.
• The DR mode screen is automatically selected, and
PRIO
appears.
• To cancel the Priority scan, touch “PRIO Watch OFF”
in the Quick Menu window.
DR mode and a priority channel
L
eft
R
ight
C
enter
D
isplay
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
Previous view
