3
BASIC OPERATION
3-7
Setting frequency
You can select the transceiver’s frequency by using the
Dial, or you can enter it on the Direct input screen.
D
Tuning with the Dial
q
On the Band selection screen, select the desired fre-
quency band. (p. 3-6)
w
Rotate the Dial to set the desired frequency.
• The default tuning step differs, depending on the operat
-
ing mode, frequency band and a version.
If the frequency cannot be changed:
Check the Lock function, and if it is ON, “
” is dis-
played, and the Dial does not function.
In this case, hold down
SPEECH
(
R
) for 1 second to
turn OFF the Lock function.
When “LOCK/SPEECH” is selected in the “[SPEECH/
LOCK] Switch” item of the “Function” Set mode, push-
ing [SPEECH/LOCK] turns OFF the lock function. (see
p. 17-20 for details)
SET
(
C
) > Function >
[SPEECH/LOCK] switch
Dial
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay
Previous view
