8-5
BASIC MANUAL
8
SET MODE
Function
» SET >
Function
RTTY Shift Width
(Default: 170)
Selects the RTTY shift width.
L
When the internal RTTY decoder is used, 170 Hz
is automatically selected.
RTTY Keying Polarity
(Default: Normal)
Selects the RTTY keying polarity.
•Normal: Key open/close = Mark/Space
•Reverse: Key open/close = Space/Mark
» SET > Function
>
SPEECH
SPEECH Language
(Default: English)
Sets the speech language to English or Japanese.
Alphabet
(Default: Normal)
Selects the type of phonetic announcement.
SPEECH Speed
(Default: Fast)
Sets the speech speed to Fast or Slow.
RX Call Sign SPEECH
(Default: ON (Kerchunk))
Turns the RX Call Sign Speech function ON or
OFF for calls received in the DV mode.
RX>CS SPEECH
(Default: ON)
Turns the RX>CS Speech function ON or OFF.
MIC Up/Down SPEECH
(Default: OFF)
Turns the Microphone Up/Down Speech
function ON or OFF.
•OFF: The frequency or repeater call sign is
not announced.
•ON: The frequency or repeater call sign is
announced, 1 second after pushing the
microphone’s [▲]/[▼] key.
In the VFO, Memory, or Call channel
mode, the frequency is announced.
When using the DR function, the
repeater call sign is announced.
S-Level SPEECH
(Default: ON)
Turns the S-meter level announcement ON or OFF.
•OFF: The operating mode and the operating
frequency are announced when you
push
.
•ON: The signal strength level, the operating
mode, and the operating frequency are
announced when you push
.
MODE SPEECH
(Default: OFF)
Turns the operating mode announcement ON or OFF.
•OFF: The selected operating mode is not
announced.
•ON: The selected operating mode is
announced.
SPEECH Level
(Default: 50%)
Sets the Voice Synthesizer audio output level.
» SET >
Function
[SPEECH/LOCK] Switch
(Default: SPEECH/LOCK)
Selects
action.
•SPEECH/LOCK: Pushing
turns ON the
Voice Synthesizer function.
Holding down
turns the
Lock function ON or OFF.
•LOCK/SPEECH: Pushing
turns the Lock
function ON or OFF.
Holding down
turns
ON the Voice Synthesizer
function.
Lock Function
(Default: MAIN DIAL)
This function electronically locks
or the
panel display* to prevent accidental changes.
* Keys and dials are also locked except for
and
.
Memo Pad Quantity
(Default: 5)
Sets the number of memo pad channels to 5 or 10.
MAIN DIAL Auto TS
(Default: High)
Sets the Auto Tuning Step function for
.
When rapidly rotating
, the tuning step
automatically changes according to the rotation speed.
•OFF: Auto tuning step is turned OFF.
•Low: Approximately two times faster.
•High: Approximately five times faster when the
tuning step is set to 1 kHz or smaller.
Approximately two times faster when
the tuning step is set to 5 kHz or larger.
MIC Up/Down Speed
(Default: Fast)
Selects the steps per second when changing
an operating frequency by holding down the
microphone’s [▲]/[▼] key.
•Slow: Low speed (25 tuning steps/second)
•Fast: High speed (50 tuning steps/second)
Summary of Contents for IC-705
Page 95: ...VI BASIC MANUAL MEMO...