12
4
SCAN
D
Scan Resume function
1. Open the “Scan Resume” screen.
[MENU] > Settings >
Scan Resume
2.
Push [▲] or [▼] to select a Scan Resume option, and
then push [ENT] to set it.
•
5sec:
Scan pauses for 5 seconds when a
signal is detected, and then resumes.
•
10sec:
Scan pauses for 10 seconds when a
signal is detected, and then resumes.
•
15sec:
Scan pauses for 15 seconds when a
signal is detected, and then resumes.
•
5sec No Signal: Scan pauses until the signal
disappears, and then resumes after 5
seconds.
L
Push [CLEAR] to return to the previous screen.
■
Open Scan
The Open Scan automatically searches for transmitted signals and enables you to locate
new stations for communication or listening.
IMPORTANT:
The Open Scan can transmit on a start channel or busy channel.
1.
Select “Open Scan” in the “Scan Mode” menu. (p. 11)
•“ ” is displayed on the operating screen.
2.
Push [SCAN] to start the Open Scan.
•“
” blinks.
3. When receiving a signal, the scan pauses and
resumes, according to the selected Scan Resume
4.
Push [SCAN] to stop the scan.
Scan start channel
■
Scanning preparation
