![background image](http://html.mh-extra.com/html/icom/ic-41pro/ic-41pro_basic-manual_612143002.webp)
i
IMPORTANT
READ ALL INSTRUCTIONS
carefully before using
the IC-41PRO UHF transceiver.
KEEP THIS BASIC MANUAL
, as it contains impor-
tant operating information that may be useful in the future.
You can download the
ADVANCED MANUAL
for more infor-
mation from the Icom website.
(http://www.icom.co.jp/world/support/download/manual/index.php)
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incor-
porated (Japan) in Japan, the United States, the United Kingdom, Germany,
France, Spain, Russia, Australia, New Zealand and/or other countries.
i. The use of the citizen band radio service is licenced in
Australia by the ACMA Radiocommunications (Citizens
Band Radio Stations) Class Licence and in New Zealand
by the Ministry of Economic Development (MED) General
User Radio Licence for Citizen Band Radio and operation
is subject to conditions contained within these licences.
ii. Always listen on a channel (or observe the channel busy
indicator) to ensure it is not already being used before
transmitting.
iii. In Australia, channel 11 is the customary calling channel
for establishing communication. Channel 40 is the cus-
tomary road vehicle channel.
iv. In Australia, except in an emergency, a CB transmitter shall
not be operated on UHF emergency channels 5 and 35.
v. No voice transmissions are permitted on data channels 22
and 23 (voice operation is inhibited on these channels).
vi. The user of this UHF CB communications device shall
not transmit Selcall tones for longer than 3 seconds dur-
ing any 60 second period.
vii. UHF CB repeaters extend the operational range of your
radio. Repeaters operate utilising two channels (repeater
input/repeater output). It is important to avoid operation
on locally used repeater input channels (in the channel
range of 31 to 38 and 71 to 78) or locally used repeater
output channels (in the channel range of 1 to 8 and 41 to
48), unless long distance communication via the repeater
is specifically required. See the section on repeater op-
eration (ADVANCED MANUAL) for more information.
viii. Please be aware that the UHF CB network may experi-
ence possible operational issues during the changeover
to narrowband. This transceiver operates on 12.5 kHz
channel spacing. During the changeover period from
25 kHz to 12.5 kHz spacing, there may be some loss of
quality when 12.5 kHz (narrowband, 2.5 kHz deviation)
transmissions are received on 25 kHz (wide band, 5.0
kHz deviation) equipment, and vice-versa. There may
also be interference due to older equipment being oper-
ated on channels adjacent to new narrowband chan-
nels, as the channel setting on these may cause some
‘overlap’. A list of currently authorised channels can be
found on the ACMA website (Australia) and on the MED
website in New Zealand.
GENERAL INFORMATION