manualshive.com logo in svg

Icom IC-4088S, Instruction Manual

Share
Download
Icom IC-4088S Instruction Manual Download Page 2

i

FOREWORD

Thank you for purchasing the IC-4088S UHF C.R.S. (Citizen Radio
Service) FM transceiver. This C.R.S. FM transceiver is designed for
those who require top quality, performance and outstanding relia-
bility under the most demanding conditions.

IMPORTANT

READ ALL INSTRUCTIONS

carefully and completely before using

the transceiver.

SAVE THIS INSTRUCTION MANUAL— 

This instruction manual

contains important operating instructions for the transceiver.

PRECAUTION

R

WARNING! NEVER

hold the transceiver so that the antenna

is very close to, or touching exposed parts of the body, especially
the face or eyes, while transmitting. The transceiver will perform
best if the microphone is 5 to 10 cm away and the transceiver is
vertical.

R

WARNING! NEVER

operate the transceiver with a headset

or other audio accessories at high volume levels. 

NEVER

attempt to charge alkaline cell batteries. Be aware that

external DC power connections will charge batteries inside the bat-
tery case. This will damage not only the battery case but also the
transceiver.

DO NOT

operate the transceiver near unshielded electrical blast-

ing caps or in an explosive atmosphere.

DO NOT

push the PTT when not actually desiring to transmit.

IC-4088S.qxd  03.10.2 8:20  Page i (1,1)

Summary of Contents for IC-4088S

































Reviews:

No comments

Brands by name

Popular brands

Load more brands