![background image](http://html.mh-extra.com/html/icom/ic-2730a/ic-2730a_service-manual_612051020.webp)
5-2
• ENTERING THE ADJUSTMENT MODE
1) Connect the JIG cable to
[MIC]
on the main unit. (See page 5-1.)
2) While holding down both
[MAIN BAND]
, turn ON the power.
• KEY ASSIGNMENTS FOR THE ADJUSTMENT MODE
• QUITTING THE ADJUSTMENT MODE
1) Remove the JIG cable from
[MIC]
.
2) Turn OFF the power, and then turn ON again.
2) Hold down both
[MAIN BAND]
.
1) Connect the JIG cable to
[MIC]
.
3) Push
[ ]
to turn ON the power.
JIG cable
Main unit (front view)
[DUP MONI]
Selects the next adjustment item.
Adjustment item name.
Indicates that the item is currently adjusted on this side of frequency.
Adjustment value.
[LOW DTMF]
Selects the previous adjustment item.
[MW]
• Stores the set value. (For the manual adjustments)
• Adjusts the value for the item. (For the automatic adjustments)
[DIAL]
Adjusts the value for the item.
(For the manual adjustments)
Adjustment frequency.
5-1 PREPARATION (Continued)
Select an adjustment item using
[MONI]
/
[LOW]
, and then set the adjustment value as specifi ed using
[DIAL]
.