![background image](http://html2.mh-extra.com/html/icom/ic-2730a/ic-2730a_programming-manual_3820177002.webp)
©June 2016 Icom America Inc.
Page 2
Icom America, Inc.
12421 Willows Road NE
Kirkland, WA 98034
Saving these settings to Memory
Your display should show your frequency, the duplex (DUP
+
or DUP
-
), and the
T
for tone encoder. To
save these settings to a Memory Channel, do the following:
1.
Press the [MW] key.
2.
MW
will blink on the display.
3.
Rotate your dial to display
CH SEL
(channel selection).
4.
Press the Enter key.
5.
Rotate the dial to the memory channel you wish to use.
6.
Press the Enter key.
7.
Rotate the dial to
WRITE
.
8.
Press the Enter key.
9.
The display will show
WRITE
.
10.
Rotate the dial to
YES.
11.
Press the Enter key.
Verify the Programming
To check the memory channels, momentarily press the [MR/CALL] key and rotate the dial through the
memory channels and confirm that the repeater is programmed into the memory channel that you
selected.