The IC-2200H has a total of 207 memory channels (including
6 scan edges and 1 call channel) for storing often used oper-
ating frequency, repeater settings, etc.
1. Setting a frequency
In VFO mode, set the desired operating frequency with re-
peater, tone and tuning steps, etc.
2. Selecting a memory channel
Momentarily push
[S.MW
]
, then rotate
[DIAL]
to select
the desired memory channel.
• “
M
” indicator and memory channel number blink.
3. Writing a memory channel
Push and hold
[S.MW
]
for 1 sec. to program.
• 3 beeps sound
• Memory channel number automatically increases when continuing
to push
[S.MW
]
after programming.
Using the HM-133V
q
In VFO mode, set the desired operating frequency, includ-
ing offset direction, tone settings, etc.
w
Push
[FUNC]
then
[
CLR
A(MW)]
.
• “
M
” indicator and memory channel number blink.
e
Push
[
Y
Y
]
/
[
Z
Z
]
to select the desired memory channel.
r
Push
[FUNC]
then push
[
CLR
A(MW)]
for 1 sec. to pro-
gram.
• 3 beeps sound
• Memory channel number automatically increases when continu-
ing to push
[
CLR
A(MW)]
after programming.
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push ,
then
MW
MW
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
[S.MW
MW
]
[DIAL]
MW
■
Programming memory channels
VI
QUICK REFERENCE GUIDE
