![background image](http://html1.mh-extra.com/html/icom/i746pro/i746pro_instruction-manual_611947077.webp)
2001 NEW
64
7
MEMORY OPERATION
■
Selecting the call channel
By default 145.00000 MHz/FM is programmed into the
call channel. However, this can be changed to suit
your operating preference. (see below)
q
Push [CALL] to select the call channel.
• “C” appears.
w
Push [CALL] again to return to the previous mode.
■
Programming the call channel
The call channel is programmed in the same way reg-
ular memory channels are. It’s convenient to program
a most-often-used frequency into the call channel for
quick recall. As with memory channels, the call chan-
nel can also hold split frequencies.
q
Rotate [M-CH] to select the call channel.
• “C” appears.
w
Select the desired frequency and operating mode
to program into the call channel.
e
Push [MW] for 1 sec. to program the displayed fre-
quency and operating mode into the call channel.
• 3 beeps are emitted when memory programming is suc-
cessful.
IMPORTANT!:
When the call channel is selected
with the [CALL] switch, the frequency CANNOT be
changed using the tuning dial, band keys or keypad
input. However, when the call channel is selected
using [M-CH] in memory mode, the frequency CAN
be changed.
[CALL]
A G C D U P C M P T O N S C P
“C” appears
[
V/M
]
[M-CH]
[MW]
A G C D U P C M P T O N S C P
IC-746PRO.qxd 02.4.2 11:31 Page 64
Summary of Contents for i746PRO
Page 115: ......