51
7
REPEATER AND DUPLEX OPERATIONS
New2001
New2001
New2001
D
Duplex operation
Push [MONI DUP]
q
C
to listen to the transmit frequency to
check whether another station is transmitting on it, or not.
• The transceiver transmit frequency appears on the display.
Push [MONI DUP]
w
C
again to stop monitoring, and then
operate normally.
NOTE:
When the Auto repeater function is ON, and the op-
erating frequency is set out of the repeater output frequency
range, the duplex mode is automatically cancelled.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display
■
Off band indication
If the transmit frequency is out of the amateur band, the off
band indication, “OFF,” appears on the display when [PTT] is
pushed. Check the frequency offset or duplex direction in this
case. (p. 50)
Appears
Duplex operation (Continued)
■