31
4
MEMORY OPERATION
New2001
New2001
New2001
D
Copying Memory content to the VFO
This is convenient when you want to change the frequency
beginning near the Memory or Call channel frequency.
Select a desired Memory channel to be copied. (p. 29)
q
Push [MW]
w
C
to display the Memory entry screen.
Rotate [DIAL]
e
S
to select “TO VFO.”
Push [
r
ï
]
D
.
• Beeps sound.
• Writes the selected Memory content to the VFO, and returns to
the VFO mode.
D
Copying Memory content to another
Memory channel
You can copy the memory content to another Memory chan-
nel.
Select the desired Memory channel to be copied. (p. 29)
q
Push [MW]
w
C
to display the Memory entry screen.
Rotate [DIAL]
e
S
to select “COPY.”
Push [
r
ï
]
D
.
Rotate [DIAL]
t
S
to select a target channel.
• If you select a pre-entered channel, the previous channel con
-
tent is displayed.
Select
Push [
y
ï
]
D
.
• Beeps sound.
• Copies to the destination channel.
• When you select a pre-entered channel, “OVERW?” is displayed.
Rotate [DIAL]
S
to select “YES,” and then push [
ï
]
D
to over-
write it.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display
Writing into a Memory or Call channel (Continued)
■