New2001
23
New2001
New2001
BASIC OPERATION
3
■
Selecting the MAIN band
Push [MAIN BAND]
➥
S
on either the left or right band to set
it as the MAIN band.
• “MAIN” appears on the MAIN band.
• You can transmit on only the MAIN band.
■
Selecting the Mode
• You can make the selection on either the left or right
band, regardless of the MAIN band.
D
VFO mode
You can use the VFO mode to set the operating frequency.
Push [V/MHz SCAN]
➥
S
.
• Selects the VFO mode.
• Rotate [DIAL]
S
to select an operating frequency.
D
Memory mode
You can use the Memory mode to operate on Memory chan-
nels.
Push [MR CALL]
➥
S
.
• Selects the Memory mode.
• Rotate [DIAL]
S
to select a Memory channel.
D
Call channel mode
You can use the Call channel mode to operate on the Call
channels.
Hold down [MR CALL]
➥
S
for 1 second.
• Selects the Call channel mode.
• Rotate [DIAL]
S
to select a Call channel.
D
Weather channel mode
(Selectable in only the U.S.A. version transceivers)
The Weather channel mode is used to hear weather broad-
casts from the NOAA (National Oceanographic and Atmo-
spheric Administration).
In the Memory mode, push [MR CALL]
➥
S
.
• Selects the Weather channel mode.
• Rotate [DIAL]
S
to select a Weather channel.
S
ide
S
ide
D
isplay
C
enter
The
C
,
S
, or
D
in the
instructions indicate the
area of the controller.
C
: Center
S
: Side
D
: Display