
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A7546W-1EX
Printed in Japan
Aug. 2019
© 2019 Icom Inc.
– 2 –
USING THE MICROPHONE
[PTT]
Speaker
Microphone
Belt clip
To attach:
Attach the connector of the speaker microphone to the multi
connector on the transceiver and tighten the screw.
Turn OFF the transceiver before attaching or
detaching the microphone.
NOTE:
•
NEVER
immerse the connector in water. If the connector
becomes wet,
BE SURE
to dry it before attaching to the
transceiver.
• To maximize the readability of your transmitted audio, hold
the microphone approximately 5 to 10 cm (2 to 4 inches)
from your mouth, and then speak at your normal voice
level.
Screw
Coin
Turn OFF
CAUTION:
Firmly attach to the multi
connector, but do not overtighten. A loose
connection will allow water intrusion into the
connector. Over-tightening the connection
can damage the transceiver.