q
Push [PWR] to turn power ON.
w
Set the audio and squelch levels.
➥
Push [VOL/SQL•MONI
] for 1 sec. to activate the moni-
tor function.
➥
Rotate [SELECTOR
VOL
] to adjust the audio output level.
➥
Push [VOL/SQL•MONI
] to cancel the monitor function.
➥
Push [VOL/SQL•MONI
] several times, then rotate [SE-
LECTOR
SQL
] to adjust the squelch level.
e
While pushing [H/L], push [DIAL•DW
] to change the
channel group, if desired.
r
Push [DIAL•DW
] once, then rotate [SELECTOR
DIAL
]
to select the desired channel.
• When receiving a signal, “
B
BU
US
SY
Y
” appears and audio is emit-
ted from the speaker.
• Further adjustment of the audio level may be necessary.
t
Push [H/L] to select the output power, if necessary.
• “
1
1W
W
” appears when low power is selected.
• Choose low power for short range communications, choose
high power for longer distance communications.
• Some channels are for low power only.
y
Push and hold [PTT] to transmit, then speak into the micro-
phone.
• “
T
TX
X
” appears.
• Channel 70 cannot be used for transmission other than DSC.
u
Release [PTT] to receive.
IMPORTANT: To maximize the readability of your transmit-
ted signal (voice), pause a few sec. after pushing [PTT],
hold the microphone 5 to 10 cm from your mouth and speak
at a normal voice level.
GRP
GRP
L
L
L
The HM-162E has a selector dial, which works various func-
tions.
➥
Each pushing [VOL/SQL] changes [SELECTOR]’s action.
• Selector status indicator shows “
[
[V
VO
OL
L]
]
,” “
[
[S
SQ
QL
L]
]
” or
“
[
[D
DI
IA
AL
L]
]
” when [SELECTOR] functions
as an audio vol-
ume, squelch controller or channel selector, respectively.
➥
Pushing [DIAL] changes [SELECTOR]’s action to channel
selector.
• “
[
[D
DI
IA
AL
L]
]
” appears
.
➥
Pushing [ENT] or [CLR] returns [SELECTOR]’s action to the
audio volume when “
[
[S
SQ
QL
L]
]
” or “
[
[D
DI
IA
AL
L]
]
” is indicated on the
display
.
• Even if [ENT] or [CLR] hasn’t been pushed, [SELECTOR]’s
action returns to the audio volume automatically after 5 sec.
of inactivity.
After these instructions describe [SELECTOR] as follow:
[SELECTOR
VOL
] : Functions as the audio volume.
[SELECTOR
SQL
] : Functions as the squelch controller.
[SELECTOR
DIAL
]: Functions as the channel selector.
[SELECTOR]
: Functions as the any other selector
or controller.
v
Selector’s action
b
Channel selection
n
Receiving and transmitting
m
Lock functions
D
D
Channel 16
q
Push [16•C] to select Channel 16.
w
Push [DIAL] to return to the con-
dition before selecting Channel
16, (or rotate [SELECTOR
DIAL
]
to select an other channel.
D
D
Call channel
q
Push [16•C] for 1 sec. to select
call channel.
w
Push [DIAL] to return to the con-
dition before selecting call chan-
nel, (or rotate [SELECTOR
DIAL
]
to select an other channel.
D
D
International and other channel group’s
channels
(U.S.A., DSC, ATIS—depending on the
connected transceiver’s version)
q
Push [DIAL•DW
] to select a regular channel.
w
While pushing [H/L], push [DIAL•DW
] to select a chan-
nel group.
• Depending on the connected transceiver’s version, channel
group selection is not available.
e
Push [DIAL•DW
] then rotate [SELECTOR
DIAL
] to se-
lect a channel.
• “
D
DU
UP
P
” appears for duplex channels.
BUSY-
25W
25W
---
---
INT
INT
---CALL
---CALL
LOCAL--
LOCAL--
DUP
DUP
SCRAM
SCRAM--TAG
--TAG
NORMAL-SCAN
NORMAL-SCAN
-
34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--
UTC
UTC
-
10:10
10:10
-
TELEPHONE
TELEPHONE
[VOL]
[VOL]
International channels
BUSY
-
25W
25W
---
---
USA
USA
---CALL
---CALL
LOCAL--DUP
LOCAL--DUP
SCRAM
SCRAM--
--
TAG
TAG
NORMAL-SCAN
NORMAL-SCAN
-
34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--
UTC
UTC
-
10:10
10:10
---
---
CCG
CCG
[VOL]
[VOL]
U.S.A. channels
GRP
GRP
GRP
BUSY
-
25W
25W
---
---
INT
INT
---CALL
---CALL
LOCAL--DUP
LOCAL--DUP
SCRAM
SCRAM--
--
TAG
TAG
NORMAL-SCAN
NORMAL-SCAN
-
34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--
UTC
UTC
-
10:10
10:10
-
CALLING
CALLING
[DIAL]
[DIAL]
for 1 sec.
C
16
Push
BUSY
-
25W
25W
---
---
INT
INT
---CALL
---CALL
LOCAL--DUP
LOCAL--DUP
SCRAM
SCRAM--
--
TAG
TAG
NORMAL-SCAN
NORMAL-SCAN
-
34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--
UTC
UTC
-
10:10
10:10
-
-
CALLING
CALLING
[DIAL]
[DIAL]
C
16
Push
The Lock function electronically locks keys and switches to
prevent accidental changes and function access from the mi-
crophone.
All keys, switches and controllers on the transceiver are
functional.
D
D
Activating the Lock function
➥
While pushing [H/L], push
[VOL/SQL•MONI
] to turn the
Lock function ON or OFF.
• “
” appears.
• Only [PWR] ([CLR]/[MENU]),
[DISTRESS],
[PTT],
[H/L],
[VOL/SQL•MONI
] and [SE-
LECTOR] are functional.
D
D
Activating the All Key Lock function
➥
While pushing [H/L], turn the
power ON by pushing [PWR] to
turn the All Key Lock function ON
or OFF.
• “
” blinks.
• Only [PWR] ([CLR]/[MENU]),
[DISTRESS] and [PTT] are func-
tional.
é
BUSY
-
25W
25W
---
---
INT
INT
---
---CALL
CALL
LOCAL--
LOCAL--
DUP
DUP
SCRAM
SCRAM--TAG
--TAG
NORMAL-SCAN
NORMAL-SCAN
-
34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--
UTC
UTC
-
10:10
10:10
-
-
INTL
INTL
[CH-]
[CH-]
Blinks
L
é
L
BUSY
-
25W
25W
---
---
INT
INT
---CALL
---CALL
LOCAL--
LOCAL--
DUP
DUP
SCRAM
SCRAM--TAG
--TAG
NORMAL-SCAN
NORMAL-SCAN
-
34"34.206N
34"34.206N
123"23.236W
123"23.236W
--
--
UTC
UTC
-
10:10
10:10
-
-
INTL
INTL
[CH-]
[CH-]
Appears
3
