![background image](http://html1.mh-extra.com/html/icom/dpmr446/dpmr446_operating-manual_4225244026.webp)
5
USER SET MODE
5-4
User Set mode items (Continued)
Backlight
Sets the Backlight status�
•
OFF:
Turns OFF the backlight�
•
OFF Auto: When pushing any key (except [PTT]),
the backlight automatically turns ON for
5 seconds�
•
OFF Auto2: When pushing any key (except [PTT]),
or when changing the displayed
contents of the LCD, the backlight
automatically turns ON for 5 seconds�
•
ON:
The backlight is turned ON all the time�
Beep
Turns the key-touch beeps ON or OFF�
Beep Level
Sets the beep and announce output level�
•
Range: 1 ~ 5, or 1 (Linked) ~ 5 (Linked)�
When setting the Linked option, the beep and
announce output levels are adjusted with [VOL]�
Ringer Level
Sets the Ringer output level�
•
Range: 1 ~ 5, or 1 (Linked) ~ 5 (Linked)�
When setting the Linked option, the ringer level is
adjusted with [VOL]�
SQL Level
(Squelch Level)
Sets the squelch level�
•
Range: 0 (open) ~ 9 (tight)
AF Min Level
(AF Minimum Level)
Sets the minimum audio output level�
This function sets the minimum audio output level and
[VOL] cannot adjust the audio lower than the set level�
•
Range: 0 ~ 255
Mic Gain
(Microphone Gain)
Sets the microphone sensitivity�
•
Range: 1 (low sensitivity) ~ 4 (high sensitivity)
VOX
Turns the VOX function ON or OFF�
NOTE:
To use the function, a headset and a VOX
converter cable are required (purchase separately)�
VOX Gain
Sets the VOX gain�
The VOX function automatically switches between
receive and transmit by detecting sounds�
Higher values make the VOX function more sensitive
to sounds�
•
Range: 1 ~ 10
VOX Delay
Sets the period of time the transceiver continues
transmitting after the user stops speaking, and then
the VOX switches to receive�
•
Range: 0�5 ~ 3�0 seconds
Battery Voltage
Sets whether or not to display the battery voltage
when turning ON the transceiver�
Signal Moni
(Signal Monitor)
Select whether or not to sound a ringer while making
a Call-Ring call or an Alert-Ring call�
•
OFF: The ringer does not sound while making a
Call-Ring call or an Alert-Ring call�
•
ON: The ringer sounds while making a Call-Ring
call or an Alert-Ring call�
Call-Ring Pattern
Selects the Call-Ring Pattern to call by placing a
melody on the transmission modulation�
L
The Call-Ring Pattern function has 16 types of Melody
pattern for use with the Call-Ring function�
Digital Ringer
Sets the ringer type for when a Call request is
received�
L
See pages 5-6 ~ 5-8 for details of Ringer Type�
Smart Ringer
Sets the ringer type for when a Smart-Ringer is
received�
L
See pages 5-6 ~ 5-8 for details of Ringer Type�
Ringer Timer
Sets the Ringer Timer for the Auto CH function�
The Ringer timer defines the transmit time that the
Auto CH function is ON�
After the set time has passed, the Auto CH function
will stop transmitting and restart the scan according to
the Auto Reset Timer setting�
•
Range: 0 ~ 16 seconds