Icom D-STAR ID-4100A Advanced Manual Download Page 12

Page: 12 / 273

MEMORY OPERATION

1-5

After setting a frequency in the VFO mode, you can

write it to a selected channel or an automatically

selected blank channel.

Memory channels 002 to 999 are blank as the default.

Writing to the selected channel

Example: Writing 146.030 MHz into Memory channel 18.

1. Push [V/M] several times until you enter the VFO

mode.

2. Rotate [DIAL] to select 146.030 MHz.

3. Push [MW].

4. Rotate [DIAL] to select “Write to New CH.”

5. Rotate [DIAL] to select the Memory channel “018.”

If you select a pre-entered channel, the previous

channel content will be overwritten.

The Call channels are also selectable.

6. Push [MW].

•

The confirmation dialog “Write to a blank channel?” is

displayed.

7. Select <YES>, then push [

• Beeps sound, and writes into the selected Memory

channel.

•Returns to the standby screen (VFO mode).

Writing to a blank channel

Example: Writing 146.030 MHz into a blank channel.

1. Push [V/M] several times until you enter the VFO

mode.

2. Rotate [DIAL] to set 146.030 MHz.

3. Hold down [MW] for 1 second.

• Beeps sound, and automatically writes into a blank

channel.

•Returns to the standby screen (VFO mode).

Writing to a Memory channel

[DIAL]

[ ]

[V/M]

[MW]

Previous view

Summary of Contents for D-STAR ID-4100A


















































































































































































































































































Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands

Icom D-STAR ID-4100A, Advanced Manual

Search results

Summary of Contents for D-STAR ID-4100A

Reviews:

Related manuals for D-STAR ID-4100A

Brands by name

Popular brands