![background image](http://html2.mh-extra.com/html/icom/d-star-id-4100a/d-star-id-4100a_service-manual_3516963014.webp)
5-6
ADJUSTMENT ITEM
TRANSCEIVER'S DISPLAY
CONDITION
VALUE
CTCSS
DEVIATION
VHF wide
50
• Connect the test equipment to the antenna
connector through the attenuator, and set
as shown below:
HPF: OFF
LPF: 20
kHz
De-emphasis: OFF
Detector: (P
−
P)/2
• No audio is applied to [MIC].
• Transmit.
• Records the adjustment value of the wide
deviation setting.
±0.75 kHz
VHF narrow
51
The same
adjustment value
as the wide setting.
UHF wide
52
±0.75 kHz
UHF narrow
53
The same
adjustment value
as the wide setting.
DTCS DEVIATION
VHF wide
54
±0.75 kHz
VHF narrow
55
The same
adjustment value
as the wide setting.
UHF wide
56
±0.75 kHz
UHF narrow
57
The same
adjustment value
as the wide setting.
DTMF DEVIATION
VHF wide
58
• Connect the test equipment to the antenna
connector through the attenuator, and set
as shown below:
HPF: OFF
LPF: 20
kHz
De-emphasis: OFF
Detector: (P
−
P)/2
• No audio is applied to [MIC].
• Transmit.
±3.5 kHz
VHF narrow
59
±1.75 kHz
UHF wide
60
±3.5 kHz
UHF narrow
61
±1.75 kHz
1750 Hz TONE
DEVIATION
VHF wide
62
±3.5 kHz
VHF narrow
63
±1.75 kHz
UHF wide
64
±3.5 kHz
UHF narrow
65
±1.75 kHz
4-2 TRANSMIT ADJUSTMENTS (continued)
Select an adjustment item using [MONI]/[QUICK], and then set the adjustment value as specified using [DIAL].
NOTE: The displayed adjustment frequency is only an example, and the frequency will differ depending on the transceiver version.