background image

7

MENU MODE

7-5

 

FUNCTIONS

 

D

CH SPACING

   (May not be displayed, depending on the 

transceiver’s presettings.)

Select “8.33 kHz,” “25 kHz,” or “8.33 kHz/25 kHz” 

channel spacing.

 

D

PRIORITY CH

   (May not be displayed, depending on the 

transceiver’s presettings.)

Select the Priority channel from the Memory channels 

stored in the transceiver (p. 5-2).

• The channel set as the Priority channel is displayed.

•  “OFF” is displayed if no channel is set as the Priority 

channel.

 

D

NOISE LIMITING

Set the noise limiting function for receiving and 

transmitting.

 

RX

• OFF:   The Noise Limiting function is OFF.

• ANL:  The Automatic Noise Limiter (ANL) is ON.

• LOW:   Reduces the received signal noise level to 1/2 

of normal.

• MID:   Reduces the received signal noise level to 1/3 

of normal.

• HIGH:  Reduces the received signal noise level to 

1/10 of normal.

 

TX

• OFF:   The Noise Limiting function is OFF.

• ON:   The Noise Limiting function is ON.

 

D

TIME OUT TIMER

   (May not be displayed, depending on the 

transceiver’s presettings.)

The Time-out Timer (TOT) limits continuous 

transmissions on the channel, to prevent occupying 

the channel for a long time.

• OFF*

1

 The Time-out Timer is disabled.

• 30 sec to 180 sec:  Sets the Time-out Timer to 

between 30 seconds and 180 

seconds.

*

Except IC-A120E (AUS version).

 

D

MIC KEY CUSTOMIZE

   (May not be displayed, depending on the 

transceiver’s presettings.)

You can customize the key assignment for the 

optional HM-217 

speaker

 

micrOphOne

 (p

. 9-3)

.

 

[P1]/[P2]

• VFO/MR MODE*

2

 Push to change the 

operating mode.

• PRIORITY CH: 

 Push to select the Priority 

channel.

• DUALWATCH: 

 Push to check the Priority 

channel while receiving 

another channel.

• SCAN START/PAUSE:   Push to start a scan. Push 

again to pause the scan

• SQL 

 Push to adjust the squelch. 

(p. 2-3)

• VOL 

 Push to adjust the volume. 

• LOCK 

 Push to turn the Key Lock 

function ON or OFF.

• ---   

No function is assigned.

*

For only USA, EXP and EUR versions.

 

[UP]/[DOWN]

• UP/DOWN: 

Push to select the channel.

• VOL UP/DOWN: 

 Push to adjust the volume 

level.

• SQL UP/DOWN: 

 Push to adjust the squelch 

level.

• ---   

No function is assigned.

 

D

LOCK FUNCTION

Select an option for the Key Lock function.

• All: 

Locks all keys.

• Microphone Key: 

 Locks the keys on the 

microphone.

• Panel Key: 

 Locks the keys on the 

transceiver.

SETTINGS group

CAUTION:

 In Canada, use of 8.33 kHz Channel 

Spacing of this radio is strictly prohibited and shall 

not be used.

Summary of Contents for A120BE










































Reviews: