manualshive.com logo in svg

ICO CCD-800, Manual

Share
Download
ICO CCD-800 Manual Download Page 2

Getting Started

Installing Keyboard Wedge Scanner

To install a keyboard wedge scanner, follow the steps listed below:

1) Make sure that the scanner has the correct Y (U)- cable for the system (a PC or terminal)

2) Turn off the power of the system

3) Unplug the keyboard from the system

4) Connect the Y (U)- cable to the system and keyboard

5) Turn on the power of the system

6) If the indicator LED lights up and the buzzer sounds, the scanner is ready for reading

Installing a RS-232 Interface Scanner

To install a RS-232 interface scanner, the host device should have a RS-232 port to 

receive data from the scanner, follow the steps listed below:

1) Make sure that the scanner has the right connector for the RS-232 port of the host device

2) Make sure that there is a power supply to the scanner (if necessary)

3) Connect the cable to the RS-232 port of the device

4) If the indicator LED lights up and the buzzer sounds, the scanner is ready for reading

2

Summary of Contents for CCD-800

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands