Hookup to 12 volt battery
Hook the RED wire to the battery's plus side and the BLACK wire to the
negative side.
There is polarity protection to prevent damage to the instrument in case the
wires are reversed, but the VR circuit will not work if the wires are reversed.
Attempt to avoid routing the wires directly
against the ignition coil and spark plug wiring.
Race Functions
Sensor setup
Each time the wheel sensor closes
while at the Distance display, the 2
left digits are blanked and the lower
ticks are on. This provides a means
of checking sensor operation at any
time during a ride. This is only visible
at very low speeds, so it will not be
distracting in a race.
Distance
The sensor is
closed
19
