LIMITED LIFETIME PROTECTION WARRANTY
For warranty information and registration, please go to
www.icmcontrols.com and click on Warranty Registration.
LIAF212-7
800.365.5525
7313 William Barry Blvd., North Syracuse, NY 13212
www.icmcontrols.com
1. Thread one lock nut all the way down the ICM517A nipple as far as it
will go and remove the second lock nut, setting it aside.
2. Install the ICM517A nipple through the knockout in disconnect box.
3. Install the rubber washer over the nipple on the inside of the
disconnect box.
4. Install the second lock nut on the nipple and tighten down until the
assembly is secure, adjusting the outer nut if needed to tighten up
the assembly.
MOUNTING DIAGRAM
ICM517A
Locknut
Nut
Disconnect
Seal
Ring
ICM517A
Disconnect
Periodically check the status light on the ICM517A. If this light is not
illuminated, check power to the disconnect or breaker where the
ICM517A is mounted. If power is preset, but no light is illuminated on
the ICM517A, replace the ICM517A immediately. If power is not present
at the breaker or disconnect, restore power and check the status light
on the ICM517A is illuminated.
STATUS CHECK PROCEDURE