(b) The headset is now in standby mode. The LED will start
flashing blue every 3 seconds.
Turning Off
:
While the headset in standby mode:
(a) Press and hold the MFB (power) button for a few seconds, and
the LED will begin to flash red for several seconds.
(b) The headset is now power off.
Pairing
Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled cell phone. The following steps describe
pairing instruction for a typical Bluetooth-enabled cell phone.
(a) Place the Headset and cell phone no more than 4 feet apart.
(b) Ensure the Headset is power off.
(c) Press and hold the MFB button for about 8 seconds until the
Headset LED alternately flashes red and blue. It’s now ready
for pairing.
