background image

6

Releasing the Harness

 Checking that the child is properly fitted into the car seat

Using the Harness

incorrect

-

too

 

high

correct

-

suitable

incorrect

-

too

 

low

You can release your child from the car seat by pressing the red button 

on the buckle. Please make sure that the buckle latches are not catching 

or hooking the child's clothes.

Adjusting the Shoulder Straps 

There are 2 sets of positions for the shoulder straps. The shoulder strap 

should route through the slot that is slightly higher childs shoulder

To adjust the shoulder strap, first pull out it and then route it through the 

appropriate slot in the backrest of the child car seat.

The ideal position is demonstrated below:

1.

The shoulder straps should be tightened to your child's body and

not cause an

y

 discomfort to your child.

2.

The height of the shoulder straps are adjusted correctly.

3.

There is no distortion, knots or twists in the belts.

4.

The vehicle safety belt should be properly routed through the car

seat, with the latch inserted into the buckle of the vehicle.

Please follow these steps to ensure that you child is correctly fitted 

into the car seat: 

v.02.20

Summary of Contents for Astral














Reviews: