5
Connect the ADSL modem to the WAN port of the router, after a few seconds the
WAN LED will light up. You can then connect the PCs; whenever the PCs are booted
up, the corresponding LEDs will also be lit.
H A R D W A R E I N S TA L L AT I O N
Once the router is connected to the power adapter, the power LED (Green) will be
illuminated and the link/act LEDs will be on. The other (green) LEDS will be lit up
once the UTP ports are in contact with a computer. When data is being transferred
from one computer to another, the LEDs will blink.
L E D I N D I C AT O R S
Name
LED Action Description
M1
Off
Router is functioning properly
On
Hardware Error (reset router)
M2
Off
Hardware Error (reset router)
Blinking:
Router is functioning properly
ON
Hardware Error (reset router)
Link/ACT Off
No network connection between computer and router
On
No network connection between computer and router
Blinking:
Data activity occurring on network
Summary of Contents for NI-707513
Page 1: ...1 M A N U A L N I 7 0 7 5 1 3 ...
Page 11: ......