W P S C O N F I G U R AT I O N
WPS (Wi-Fi Protected Setup) function allows you to add a new
wireless device to an existing network quickly. WPS can only
be used if the router also supports this feature.
Push the button on the router and on the adapter and wait
until the following screen appears. Then click
“Finish”.
The WPS connection can also be established by making the
connection in the software utility. This will also enable you to
use a PIN code. For more information on WPS, please read the
full manual on the CD.
C E M A R K W A R N I N G
This is a class B product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
NATIONAL RESTRICTIONS
This device is intended for home and offi ce use in all EU coun-
tries (and other countries following the EU directive 1999/5/EC)
without any limitation except for the countries mentioned below:
COUNTRY RESTRICTION
REASON/REMARK
Bulgaria
None
General authorization required for
outdoor use and public service
France
Outdoor use limited to
Military Radiolocation use.
10 mW e.i.r.p. within the Refarming of the 2.4 GHz band has
band 2454-2483.5 MHz been ongoing in recent years to
allow current relaxed regulation.
Full implementation planned 2012
Italy
None
If used outside of own premises,
general authorization is required
Luxembourg
None
General authorization required for
network and service supply(not for
spectrum)
Norway
Implemented
This subsection does not apply for
the geographical area within a
radius of 20 km from the centre of
Ny-Ålesund
Russian Federation
None
Only for indoor applications
Please don’t use the product outdoors in France S’il vous
plaît ne pas utiliser le produit à l’extérieur en France.
15
14
