IR-PAD SERIES USER MANUAL
15
7.
Quick Start Instructions
THE THERMAL IMAGER NEEDS SUFFICIENT WARM-UP TIME FOR THE MOST
ACCURATE TEMPERATURE MEASUREMENTS AND BEST IMAGE QUALITY.
THIS TIME CAN OFTEN VARY BY ENVIRONMENTAL CONDITIONS. IT IS BEST
TO WAIT A MINIMUM OF 10 MINUTES FOR THE DEVICE TO COMPLETELY
WARM-UP.
D.
Launch IR Flash software
by double-clicking the
associated desktop icon.
C.
Power on device.
A.
B.
Attach neckstrap clips to the
device hooks. Turn right to tighten
the closing bolt. Turn left to
loosen bolt closing bolt.
Attach the handstrap to the
IR-Pad Series IR Camera.
7-1 Neckstrap/Handheld Setup
