ICI AL-FBM71TYN-RT, Installation & Use Manual, Page: 3 / 8

REFERENCE DIAGRAMS
STEP 1
Open the hood of your
4Runner and remove the
top plastic radiator cover by
removing the 10 plastic
retainer clips. Simply push in
the center of the clips (like a
button) to disengage them.
STEP 2 (SAVE
COMPONENTS)
With a 10mm socket, remove
the 3 bolts attaching the
bumper cover to the center of
the radiator support. The top
bolt is shown in Figure 2 .
Follow the bumper cover
down to fi nd th 2 bolts
located directly beneath it.
DISMOUNTING THE OEM BUMPER
Figure 1.
STEP 3 (SAVE
COMPONENTS)
With a trim removal tool,
remove the 6 plastic retainer
clips holding the bumper
cover to the radiator
support. If equipped, unplug
the TSS sensor harness as
well.
Figure 3.
04 05
Front view of Bumper
and Winch Carrier set-up:
Back view of bumper, RT
Hoop, and Internal Light
Bracket set-up:
Figure 2 .