ICI KRONOS
Rev. 6 - 08/04/2010
FW 0.1
Pag.11
4 WALL MOUNTING
(ONLY FOR INSTALLERS AND TECHNICAL SERVICE
CENTRES)
Mounting procedure:
Separate the outer cover (1) pushing gently with a screwdriver on one of the two side slots (2).
Fix the back part of the device with two Ø 6 mm nogs.
The square hole is preset for cable passage (section of 3x0,35 mm
2
) which will exit from the corrugate located in
the wall.
Side venting grates (3) must be fitted to the left.
Remove the tripolar terminal box from the device and connect the conductors following the diagrams on the
previous pages.
Insert the cabled terminal box and fix the device to its back cover.
IMPORTANT:
ICI Kronos is powered directly by the NEREIX multi-autonomous station board.
During maintenance, the NEREIX board must be de-energised.
In case of power outage, data are automatically saved by the device microprocessor.
(2)
(1)
(1)
(3)
(1)
